Unison Research Max 2
DESCRIPTION
This new Unison Research model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose not only the sensitivity but also the impedance were optimized. The MAX_2 is a two-way floor standing, reflex loaded system, of important size however compact. The reflex ducts is front firing to make easier to place the diffusers in the room.
DESCRIPTION
This new Unison Research model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose not only the sensitivity but also the impedance were optimized. The MAX_2 is a two-way floor standing, reflex loaded system, of important size however compact. The reflex ducts is front firing to make easier to place the diffusers in the room.
DESCRIPTION
This new Unison Research model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose not only the sensitivity but also the impedance were optimized. The MAX_2 is a two-way floor standing, reflex loaded system, of important size however compact. The reflex ducts is front firing to make easier to place the diffusers in the room.
PRODUCT DETAILS
Technical Specifications
System- Floor standing - front firing Reflex
Loudspeakers-
1 x 15” woofer
1 x 1.4 “ compression driver with titanium diaphragm
Numbers of ways- 2 way
Frequency Response- 30-20000 Hz
Cross-over- Woofer low-pass 12 dB
Tweeter high- - pass 6 dB
Crossover Frequency- 800 Hz
Power- 500 watt RMS
Amplifier- from 10 to 200 Watt RMS or more – without clipping
Sensibility- 96 dB @2.83Vrms/1 meter
Nominal impedance- 8 ohm ( 7.4 ohm min )
Physical Specifications
Size- 101h x 43,5w x 54d cm
Weight- 60 Kg each
