TechDAS TDC01
Major features
• Employs a housing and support base of aircraft-grade super duralumin, with DLC coating. Constrained-layer damping has been achieved with special internal alloys, which combine to further increase the strength of the egg-shape design and to suppress any remaining vibration. As a result, it has no loss of energy, but picks up even the most minute signals.
• Employs a unique magnetic circuit that enables a high output voltage (0.45mV) with low internal resistance (1.4 ohm)
• Cantilever made of high strength super duralumin (A2017).
• Semi-line contact stylus tip minimizes any tracing distortion.
• A range of accessories are attached to maximize the superb performance of the cartridge.
Major features
• Employs a housing and support base of aircraft-grade super duralumin, with DLC coating. Constrained-layer damping has been achieved with special internal alloys, which combine to further increase the strength of the egg-shape design and to suppress any remaining vibration. As a result, it has no loss of energy, but picks up even the most minute signals.
• Employs a unique magnetic circuit that enables a high output voltage (0.45mV) with low internal resistance (1.4 ohm)
• Cantilever made of high strength super duralumin (A2017).
• Semi-line contact stylus tip minimizes any tracing distortion.
• A range of accessories are attached to maximize the superb performance of the cartridge.
Major features
• Employs a housing and support base of aircraft-grade super duralumin, with DLC coating. Constrained-layer damping has been achieved with special internal alloys, which combine to further increase the strength of the egg-shape design and to suppress any remaining vibration. As a result, it has no loss of energy, but picks up even the most minute signals.
• Employs a unique magnetic circuit that enables a high output voltage (0.45mV) with low internal resistance (1.4 ohm)
• Cantilever made of high strength super duralumin (A2017).
• Semi-line contact stylus tip minimizes any tracing distortion.
• A range of accessories are attached to maximize the superb performance of the cartridge.
PRODUCT DETAILS
SPECIFICATIONS
Type- Moving Coil (MC)
Frequency response- 10 – 50,000 Hz
Output voltage- 0.45mV (1kHz)
Internal impedance- 1.4 ohm
Recommended load impedance- 100 – 200 ohm
Tracking force recommended- 2.0 – 2.3g
Cartridge weight- 12g
Cantilever- super duralumin (A2017)
Stylus tip- Semi-line contact (3μm x 30μm)
Housing- Super duralumin (A7075) + DLC coating
Housing base- Super duralumin (A7075) + DLC coating + damping treatment
Channel balance- 0.5dB (1kHz)
Channel separation- over 30dB (1kHz)
INCUDED ACCESSORIES
8N LEAD WIRES
NON-MAGNETIC TWEEZERS
TITANIUM SCREWS FOR MOUNTING
NON-MAGNETIC SCREW DRIVER
DIGITAL STYLUS FORCE GAUGE FOR MC PHONO CARTRIDGE
