NAD C 328

€649.00

DESCRIPTION

Hybrid Digital DAC Amplifier

Quantity:

Add To Cart

PRODUCT DETAILS

Analogue In/Headphone Out

Continuous output power into 8 Ohms and 4 Ohms- 50W (ref. 20 Hz-20 kHz at rated THD, both channels driven)

THD (20 Hz – 20 kHz)- <0.005 % at 1 V out

Signal-to-Noise Ratio- >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)

Frequency response- ±0.3 dB (20 Hz – 20 kHz)

Output impedance- 11 ohms

Analog In/Subwoofer Out

THD (20 Hz – 20 kHz)- <0.005 % at 1 V out

Signal-to-Noise Ratio- >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)

Frequency response- ±0.2 dB (20 Hz – 20 kHz)

Output impedance- 200 ohms

Analog In/Speaker Out

THD (20 Hz – 20 kHz)- <0.03 % (100 mW to 40W, 8 ohms and 4 ohms)

Signal-to-Noise Ratio- >95 dB (A-weighted, 500 mV input, ref. 1 W out 8 ohms)

Frequency response- ±0.3 dB (20 Hz – 20 kHz)

Phono In/Speaker Out

THD (20 Hz – 20 kHz)- <0.03 % (200 mW to 40 W, 8 ohms and 4 ohms)

Signal-to-Noise Ratio- >75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms)

Frequency response(RIAA deviation)- ±0.3 dB (20 Hz – 20 kHz)

Note- The RIAA response is consistent with a pre-emphasis that is rolled off at 50kHz by a second-order filter, such as used in Neumann cutting lathes.

Power consumption

at ECO Standby mode- 0.5 Watts*

at Control Standby mode- 0.6 Watts**

OFF mode (Power switched OFF)- 0 Watts

* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input

NOTE: Bluetooth connectivity is always live when configured.