Michi X3 Series 2
Elegant, efficient, uncompromised. The Michi X3 Series 2 Integrated Amplifier combines 350 Watts of robust Class AB output power and an 8-Channel ESS SABRE Digital to Analog converter to deliver a refined and expansive performance. Analog RCA, XLR, Moving Magnet Phono, aptX™ HD Bluetooth, Coaxial, Optical, and PC-USB rendering MQA are all supported.
PRODUCT DETAILS
Physical Specifications
Dimensions (W × H × D)-
485 x 150 x 452mm
19" × 6" × 17 3/4"
Front Panel Height- 132 mm (5.25")
Power Requirements- 230V, 50Hz
Power Consumption- 500W
Standby Power Consumption-
Normal: <0.5W
Network Wakeup: <2W
Net Weight- 28.9kg (63.7 lbs.)
BTU Rating- 1303 BTU/h
Maximum Power Output- 350W/Ch (4Ω)
Continuous Power Output- 200W/Ch (8Ω)
Technical Specifications
Total Harmonic Distortion (TDH)- <0.008%
Frequency Response-
Line Level Inputs: 10Hz - 100kHz (+0dB, -0.4dB)
Digital Inputs: 20Hz - 20kHz (0 ± 0.4dB)
Phono Input: 20Hz - 20kHz (+0dB, +0.4dB)
S/N Ratio (IHF "A" Weighted)-
Line Level Inputs: 102dB
Digital Inputs: 102dB
Phono Input: 80dB
Intermodulation Distortion (60Hz:7kHz, 4:1)- <0.03%
Damping Factor (20Hz - 20kHz, 8Ω)- 350
Channel Separation- >55dB
Input Sensitivity-
Line Level Inputs (RCA): 340mV
Line Level Inputs (XLR): 540mV
Phono Input (MM): 5.2mV
Input Impedance-
Line Level Inputs (RCA): 100kΩ
Line Level Inputs (XLR): 100kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ
Input Overload-
Line Level Inputs (RCA): 3.5V
Line Level Inputs (XLR): 5.5V
Phono Input: 60mV
Pre-out Level- 1.9V
Output Impedance- 100Ω
Tone Controls- ±10dB at 100Hz / 10kHz
Coax/Optical Digital Input Signals- SPDIF LPCM (Up to 24-bit/192kHz)
PC-USB-
USB Audio Class 1 (up to 24-bit/96kHz)
USB Audio Class 2 (up to 24-bit/384kHz)*
*Driver installation required
DSD and DoP support
MQA and MQA Studio support
Roon Tested support
