Meridian DSP5200SE
DESCRIPTION
The DSP5200SE contains a complete matched audio system, giving the highest overall quality, lower power consumption and the performance of a traditional passive loudspeaker eight times the physical volume.
Sold as a pair.
Technical Specifications
AUDIO INPUTS
Meridian SpeakerLink (RJ45) & RCA phono digital inputs accepting 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support
AUDIO OUTPUTS
Meridian SpeakerLink (RJ45) & RCA phono digital outputs delivering 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support
PERFORMANCE
Peak SPL: 116dB at 1m
Noise less than 15dB SPL
Frequency response in-room within 3dB: 35Hz to over 32kHz
AMPLIFIERS
3 x 75W (225W)
Overall distortion typically <0.02% at any frequency or level
LOW-BASS DRIVER
160mm polypropylene long-throw
MID/BASS DRIVER
160mm polypropylene long-throw
BERYLLIUM DOME TWEETER
25mm (1”) Meridian piston in short-horn, beryllium dome with silver voice-coil.
DSP FEATURES
2 x Freescale 56367 running at 150MHz
FIFO memory buffer input for the lowest possible jitter from almost any source
Crossover minimum-phase at 2.6kHz
Bass protection
Response correction for the whole loudspeaker
Hybrid analogue/digital volume control
Balance control with proportional delay compensation
DISPLAY
Eight-character display with additional status indicators; can be blanked during use
DIMENSIONS / WEIGHT
HEIGHT: 903mm [36in] (Without feet/spikes)
WIDTH: 178mm [7in] tapering to 300mm [11.8in]
DEPTH: 220mm [8.7in] tapering to 360mm [14.2in]
FOOTPRINT (W x D): 300mm [11.8in] x 360mm [14.2in]
WEIGHT: 35kg [77.1lbs]
POWER
20VA standby: 600VA max
