McIntosh MHA200

PRODUCT DETAILS

HEADPHONE OUTPUT SPECIFICATIONS

Headphone Power Output- 500mW

Headphone Output Impedance-
32-100 Ohms
100-250 Ohms
250-600 Ohms
600-1,000 Ohms

ELECTRONIC SPECIFICATIONS

Rated Power Band- 20Hz to 20kHz

Total Harmonic Distortion- 0.5%

Intermodulation Distortion-
0.04% Typical
0.4% Maximum

Dynamic Headroom- 1.5dB

Frequency Response- +0, -0.5dB from 20Hz to 20,000Hz

Sensitivity (Unbalanced)- 1.0 Vrms

Sensitivity (Balanced)- 2.0 Vrms

Maximum Input Signal (Unbalanced)- 8V

Maximum Input Signal (Balanced)- 16V

Signal To Noise Ratio- 94dB

Input Impedance (Balanced / Unbalanced)- 20K/10K

Damping Factor- >150

Voltage Gain-
12dB at 32 Ohms
17dB at 100 Ohms
21dB at 250 Ohms
25dB at 600 Ohms

CONNECTIVITY

Headphone Output- One pair of 3-pin balanced XLR connectors for dedicated Left and Right balanced output;
One 4-pin balanced XLR connector for balanced stereo output;
One 1/4" stereo headphone jack

Balanced Input- 1

Unbalanced Input- 1

CONTROL

Power Control Input- 1

Power Control Output- 1

GENERAL SPECIFICATIONS

Vacuum Tube or Solid State- Vacuum Tube

Power Requirement- 120V 50/60Hz, 1.5A

Standby Power Requirement- <0.5 Watts

Output Type- Unity Coupled Output Transformer

WEIGHTS & DIMENSIONS

Dimensions (W x H x D)- 6-1/8" (15.6cm) x 5-3/4" (14.6cm) x 9-1/8" (23.2cm)

Weight- 10.5 lbs (4.8 kg)

Shipping Weight- 12 lbs (5.5 kg)