E.A.T Linear Power Supply

€1,720.00

DESCRIPTION

Elegant power supply. We at E.A.T. strongly believe that power supply is a part of signal path and the quality of power supply extremely significantly contribute to the sound quality. It is done without any compromise.

Full bridge rectifying use for ultra-fast diodes followed with 8800uF filtration bank. Voltage regulator is fully discrete. No operational amplifier is used. Voltage reference is TL431. This all result in very low noise and perfect regulation. In many aspects it also over-performing battery power supply. Ripple voltage is lower than 1 microvolt! Voltage accuracy is better than ± 0,05%. The temperature drift is beyond every level of standard power supplies. LPS is Dedicated for E.A.T. phono stages and turntables.

  • Dual output

  • Clean power supply

  • Two separate power supplies in one!

  • RFI eliminated from mains

  • Elegant looks

DESCRIPTION

Elegant power supply. We at E.A.T. strongly believe that power supply is a part of signal path and the quality of power supply extremely significantly contribute to the sound quality. It is done without any compromise.

Full bridge rectifying use for ultra-fast diodes followed with 8800uF filtration bank. Voltage regulator is fully discrete. No operational amplifier is used. Voltage reference is TL431. This all result in very low noise and perfect regulation. In many aspects it also over-performing battery power supply. Ripple voltage is lower than 1 microvolt! Voltage accuracy is better than ± 0,05%. The temperature drift is beyond every level of standard power supplies. LPS is Dedicated for E.A.T. phono stages and turntables.

  • Dual output

  • Clean power supply

  • Two separate power supplies in one!

  • RFI eliminated from mains

  • Elegant looks

PRODUCT DETAILS

Technical Specifications

MODEL- E.A.T. LPS Linear Power Supply

INPUT POWER SUPPLY- 120V or 230V AC

OUTPUT VOLTAGE / CURRENT- 1 × 15V/2A ± 0,05%, noise max. 10uV

OUTPUT VOLTAGE / CURRENT- 1 × 18V/1.5A ± 0,05%, noise max 1uV

Physical Specifications

DIMENSIONS W × H × D- 435 × 60 × 272 mm

WEIGHT- 4900 g

SUPPLIED CABLES-
1 × 15V 2.1mm (for E.A.T. C-Sharp, EAT C-Major and all Pro-Ject turntables)
1 × 15V XLR 4Pin (for E.A.T. E-Flat, E.A.T. Forte S)
1 × 18V 2.5mm (for E.A.T. E-Glo S, EAT Forte and all Pro-Ject Phono products except Phono Box RS and AD Box S2 Phono)
1 × 18V 2.1mm with longer connector shaft 14mm for Pro-Ject Xtension turntables

You Might Also Like