Chord ULTIMA Pre 2

PRODUCT DETAILS

Technical Specifications

Inputs & Outputs-

• 4x Stereo Balanced XLR Inputs – Line In 1, Line In 2, Line In 3, and Line In 4

• 4x Stereo Unbalanced RCA Inputs – Line In 5, Line In 6, Tape 1, Tape 2

• 1x Stereo Output – Either via Balanced XLR or Unbalanced RCA

• 2x Stereo Outputs – RCA unattenuated for recording loop

• 1x Stereo Balanced XLR AV Bypass Input

Frequency Range- 2.5Hz – 200kHz +/- 3dB

Total Harmonic Distortion- 0.002% 20Hz – 20kHz

Intermodulation Distortion- -115dB on all inputs

Signal to Noise Ratio- -120dB on all inputs

Channel Separation- 20Hz @ 100dB, 1kHz @ 95dB, 10kHz @ 90dB, 20kHz @ 85dB

Channel Balance- 0.01dB

Input Max Voltage- 17v RMS Balanced – 8.5v RMS Unbalanced

Output Max Voltage- 17v RMS Balanced – 8.5v RMS Unbalanced

Output Offset- 0mV (Both Channels)

Potentiometer Performance- 0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13seconds Full Travel)

Nominal Gain- All inputs subject to six levels of switchable gain – x0.5, x1, x1.5, x2, x2.5, and x3

Input Impedance- 100 kΩ Balanced – 50 kΩ Unbalanced

Output Impedance- 100Ω (Short Circuit Protected)

Operating Voltage- 85v – 270v AC (50Hz – 60Hz) Auto Switching

Power Consumption- 30w

Physical Details

Dimensions Without Integra Legs- 420mm (w) x 355mm (d) x 133mm (h)

Dimensions With Included Integra Legs- 480mm (w) x 355mm (d) x 173mm (h)

Weight- 18kg

Box Contents-

• ULTIMA PRE 2 Quickstart guide

• Safety instructions

• 10A Mains IEC cable

• Metal IR system remote control

• 2x AAA batteries